current position:


Add: langfang development zone,608

entrepreneurship road

Powered by ​



© Copyright langfang cable construction machinery technology co., LTD. All rights reserved      ICP20143698      

Scan pays attention to us

Page view:

Brake life test bed

1.Thebrakelifetesttablecanbeupto3doublearmsand6simultaneoustest;  2.Theratedvoltageofthebrakecanbemediated.ThevoltagerangeofadjustmentisDC48V-DC220V.AC48V-AC220V;  3.Theratedcurrentofthebrakeislesstha
Affiliate classification
Buy now
Add to Cart
I want to make an inquiry
Product description
Product parameters
Related video

  1. The brake life test table can be up to 3 double arms and 6 simultaneous test;

  2. The rated voltage of the brake can be mediated. The voltage range of adjustment is DC48V - DC220V. AC48V - AC220V;

  3. The rated current of the brake is less than 20A (6, no less than 3A);

  4. The test table can be recorded

  Number of runs: the number of opening times of the lock and the single record of three tow tractors;

  Number of failures: the number of times that the opening time of the lock opening is exceeded, and the six holding locks are recorded separately;

  Open time: open the opening time of the lock, and record the six locks separately.

  Asynchronous time: the time difference between the two holding locks of the same tractor is opened, and the three tractors are recorded separately.

  5. The test bed can be set

  Data removal: the number of operation times of the tractor and the number of failures are cleared, and three tow tractors are removed separately.

  Fault alarm: the number of alarm times for holding the lock and the setting of the six locks separately;

  Check out time: the time of the opening time of the lock opening is determined, and the time of timeout is considered to be a fault, and the time of the six inspection time is set separately.

  Test number: whether the tractor is involved in the test, and three towing machines are set separately;

  Switch detection: whether the lock switch is tested, no fault detection is detected, and 6 lock switches are set separately.

  The opening time of the gate: the time of the opening of the lock gate and the time of the closing time of the lock switch are set separately;

  6. The test bed can adapt to the open contact and closed contact of the lock.

Corresponding parameter set not found, please add it in property template of background
Key words
Previous article
Next article